Face
Forward Print

CAB Series

Cab 8n
Cab 8n
The CAB™ 8n is the newest CAB device from MediaMatrix®. It features eight audio channels that can be individually configured as inputs or outputs. This provides unparalleled configuration options for an audio interface. The CAB 8n is a half-width, 1RU-tall device that is capable of utilizing Power over Ethernet (PoE). This compact size allows convenient mounting in equipment racks and under tables, while the unique I/O configuration means all the inputs and outputs required can be handled by a single box. All of this can be connected via a single wire when used with any standard PoE network switch or standard power injector. A 12VDC power inlet is included for situations where PoE is not available. GPIO and serial bridging are also available on the CAB 8n, including eight programmable pins and two Form C relays. The serial bridging is capable of handling RS-232, EIA-422 and EIA-485.
Cab 4n-CM1
Cab 4n-CM1
The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB 4n-CM1 (required for ControlMatrix® projects) features MediaMatrix®'s Scalable I/O Architecture, with support for the popular line of MediaMatrix I/O modules (up to four modules configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation, IxO). All inputs can be configured in groups of four channels for microphone or line level in any of the available configurations. The CAB 4n features a versatile, performance-oriented GPIO port, which provides configurable contacts for analog, digital and dry contact use. All of the GPIO ports are configurable from the NWare™ software and an easy DIN rail mounting system for efficient rack wiring and service is available as the GPIO-25.
Cab 4n-CM2
Cab 4n-CM2
The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB 4n features MediaMatrix®'s Scalable I/O Architecture, with support for the popular line of MediaMatrix I/O modules (up to four modules configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation, IxO). All inputs can be configured in groups of four channels for microphone or line level in any of the available configurations. The CAB 4n features a versatile, performance-oriented GPIO port, which provides configurable contacts for analog, digital and dry contact use. All of the GPIO ports are configurable from the NWare™ software and include an easy DIN rail mounting system for efficient rack wiring and service.
Cab 8i
Cab 8i
The CAB™ 8i is an 8-channel, input only, digitally-controlled preamp using 24-bit analog-to-digital converters. Includes mic preamps with software-controllable 48V phantom power, mic/line selection and analog gain.
Cab 16i
Cab 16i
The CAB™ 16i is a 16-channel, line level, input only device using 24-bit analog-to-digital converters.
Cab 16o
Cab 16o
The CAB™ 16i and CAB™16o, respectively, are sixteen line-level input and output MediaMatrix® gateways onto and off of a 100baseT Ethernet network employing CobraNet™ proprietary protocol to ensure seamless, error-free transmission of high-quality real-time audio without dropouts or lossy compression. The CAB 16o downloads and reconstructs audio data from the Cobranet Ethernet network 16 line-level channel outputs. Maximum output levels of +6, +12, +18, and +24 dBu and volume from zero to full-scale in 1/2 dB steps are software controllable through the MediaMatrix.
Cab 16d
Cab 16d
The CAB™ 16d is a 16-channel input and 16-channel output device, which includes an RJ-45 100 BaseTX Ehternet port and an RS-485 port.
FACE Contact   
Hoek 76 - unit 301     
2850 Boom

E: info@face-be.eu     
T: +32 3 844 67 97
F: +32 3 844 67 4
6
H.R. Antwerpen 291868
IBAN BE05 4144 1939 3175
BTW BE0 448 180 481

Face Audio light led en video apparatuur